From fa0fceda773f553c2691f69ad989e81a3c5cc031 Mon Sep 17 00:00:00 2001
From: Catalin(ux) M BOIE <catab@embedromix.ro>
Date: Tue, 8 Apr 2008 00:59:20 +0300
Subject: [PATCH] Add support for a no-name 4 ports multiserial card

It is a no-name PCI card. I found no reference to a producer so I
used "UNKNOWN_0x1584" as the name.

Full lspci:
01:07.0 0780: 10b5:9050 (rev 01)
        Subsystem: 10b5:1584
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- \
                ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- \
                DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 10
        Region 1: I/O ports at ec00 [size=128]
        Region 2: I/O ports at e480 [size=32]
        Region 3: I/O ports at e400 [size=8]
        Capabilities: [40] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA \
                        PME(D0+,D1-,D2-,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] #06 [0080]
        Capabilities: [4c] Vital Product Data

After:
0000:01:07.0: ttyS4 at I/O 0xe480 (irq = 10) is a 16550A
0000:01:07.0: ttyS5 at I/O 0xe488 (irq = 10) is a 16550A
0000:01:07.0: ttyS6 at I/O 0xe490 (irq = 10) is a 16550A
0000:01:07.0: ttyS7 at I/O 0xe498 (irq = 10) is a 16550A

Signed-off-by: Catalin(ux) M BOIE <catab@embedromix.ro>
---
 drivers/serial/8250_pci.c |   17 +++++++++++++++++
 1 files changed, 17 insertions(+), 0 deletions(-)

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 788c355..b64a17c 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -769,6 +769,9 @@ pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
 #define PCI_SUBDEVICE_ID_POCTAL232	0x0308
 #define PCI_SUBDEVICE_ID_POCTAL422	0x0408
 
+/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
+#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
+
 /*
  * Master list of serial port init/setup/exit quirks.
  * This does not describe the general nature of the port.
@@ -884,6 +887,15 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_PLX,
+		.device		= PCI_DEVICE_ID_PLX_9050,
+		.subvendor	= PCI_VENDOR_ID_PLX,
+		.subdevice	= PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
+		.init		= pci_plx9050_init,
+		.setup		= pci_default_setup,
+		.exit		= __devexit_p(pci_plx9050_exit),
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_PLX,
 		.device		= PCI_DEVICE_ID_PLX_ROMULUS,
 		.subvendor	= PCI_VENDOR_ID_PLX,
 		.subdevice	= PCI_DEVICE_ID_PLX_ROMULUS,
@@ -2199,6 +2211,11 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b2_4_921600 },
+	/* Unknown card - subdevice 0x1584 */
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_VENDOR_ID_PLX,
+		PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
+		pbn_b0_4_115200 },
 	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
 		PCI_SUBVENDOR_ID_KEYSPAN,
 		PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
-- 
1.5.5.1